Inkbird Temperature and Humidity Controller ITC-608T Pre-Wired Dual Stage Thermostat 120VAC 15A 1800W ETL Listed Mushroom Greenhouse Homebrew
Product Description
Notes:
Please pay more attention when choosing the sensor. Sensor is included, and customer have to choose temp and humidity version if you want controlling both temp and humidity. Customer have to choose temp version if you want using temp control function. Customer have to choose humidity version if you want using humidity control function.
Description:
Temp and humidity controller ITC-608T has certificate of ETL (US and Canada approved). The product will be safer when using. ITC-608T has multifunctional control mode. It can control both temp and humidity at the same time. (Plug both temp and humidity sensor). Or control single temp and has 12 different time stage periods for temp control mode. Or only control humidity with plug humidity sensor. This unit supports both F and C degree, compress delay, calibration and reset setting values saving. Heating/Cooling differential function could be set separately for refrigeration and heating to protect temp controller from violent change. Same as humidity control.
Specification:
Maximum output load：120Vac, 60Hz, 15A, 1800W
Temp measurement range：-40℃~100℃/-40℉~212℉
Temp display accuracy：0.1℃/℉(<100℃/℉)
Relative humidity measurement range：5~99%RH
Humidity display accuracy：0.1%RH
Display unit：temp:°C or°F；humidity：%RH
Ambient temp：-20℃~60℃/-4℉~140℉
Storage environment：temp：0℃~60℃/32℉~140℉；humidity：20~80%RH(Unfrozen or condensation state )
Temp/Humidity sensor cable Length: 2m(78.74in)
Input Power Cable Length: 1.5m（59.05in）
Unit Dimension: 20.8cm*8.5cm*3.5cm（8.19*3.35*1.38in）
Supporting Temp and humidity calibration
Compressor delay protection for refrigeration control
High and low temp/humidity alarms are available
Over-temp/humidity and sensor fault alarm
Package Content:
1x ITC-608T temp and humidity controller
1x Temp sensor
1x Humidity sensor
1x Manual
Please pay more attention when choosing the sensor. Sensor is included, and customer have to choose temp and humidity version if you want controlling both temp and humidity. Customer have to choose temp version if you want using temp control function. Customer have to choose humidity version if you want using humidity control function.
Description:
Temp and humidity controller ITC-608T has certificate of ETL (US and Canada approved). The product will be safer when using. ITC-608T has multifunctional control mode. It can control both temp and humidity at the same time. (Plug both temp and humidity sensor). Or control single temp and has 12 different time stage periods for temp control mode. Or only control humidity with plug humidity sensor. This unit supports both F and C degree, compress delay, calibration and reset setting values saving. Heating/Cooling differential function could be set separately for refrigeration and heating to protect temp controller from violent change. Same as humidity control.
Specification:
Maximum output load：120Vac, 60Hz, 15A, 1800W
Temp measurement range：-40℃~100℃/-40℉~212℉
Temp display accuracy：0.1℃/℉(<100℃/℉)
Relative humidity measurement range：5~99%RH
Humidity display accuracy：0.1%RH
Display unit：temp:°C or°F；humidity：%RH
Ambient temp：-20℃~60℃/-4℉~140℉
Storage environment：temp：0℃~60℃/32℉~140℉；humidity：20~80%RH(Unfrozen or condensation state )
Temp/Humidity sensor cable Length: 2m(78.74in)
Input Power Cable Length: 1.5m（59.05in）
Unit Dimension: 20.8cm*8.5cm*3.5cm（8.19*3.35*1.38in）
Supporting Temp and humidity calibration
Compressor delay protection for refrigeration control
High and low temp/humidity alarms are available
Over-temp/humidity and sensor fault alarm
Package Content:
1x ITC-608T temp and humidity controller
1x Temp sensor
1x Humidity sensor
1x Manual
